Here's a picture of the Beaver Street siding track plan as a Free-mo module. Prototype based but not a foot by foot copy.
The green squares are 1ft grid and the grey are 1 inch grid. The turnouts are all #6's. Drawing made using 3rd PlanIt software.
The modules are under construction as of this time.
pslota wrote:I am modeling the AC&Y Brittain Yard to Delphos and plan on including the interchange at Brittain as well as at Belt Junction. I do not have ABB equipment modeled as of yet but will as things progress. Growing up in Barberton I have fond memories of the ABB - the "Chemical" tank cars being switched out across Tuscawaras Ave (I used to watch from Strazen's Cafe at 14th street corner), unloading box cars as I worked for the Ohio Brass Compny, and watching the trains run the tracks behind the Magic City Shopping Center.
Can you tell me if the location in the link below is the Ohio Brass company siding? I know that the picture was taken in the mid-40's. The W&LE hopper seems to spotted near the boiler room in the north east corner of the plant.
The track arrangement looks like it matches the one on the Sanborn Fire map of the plant from 1930 (updated in 1947)
Would you also share what kind of stuff you unloaded from boxcars for the plant. This location might be a good future module!
Thanks in advance!
I worked at Ohio Brass from June 1965 until April 1966 (when I went to work for Uncle Sam). I was a Tow Motor or Fork Lift operator on third shift. Usually I unloaded box cars on overtime after my normal shift which was spent emptying trash bins, moving pallets of fired insulators from the kilns to the inspection areas, and setting "finished" product in the warehouse.
The usual loads removed from the box cars were pallets of bagged ceramic mix, boxes of metal caps and spindles that were used to hook insulators together, and raw lumber.
I never loaded box cars...this was done by the day shift fork lift operators against bills of lading furnished by the shipping department but was definately finished insulators.
Who is online
Users browsing this forum: No registered users and 1 guest