Construction of the LK&O Railroad

An open forum to discuss all aspects of modeling the Akron Canton & Youngstown Railroad.
User avatar
LKandO
Posts: 37
Joined: Tue May 22, 2012 9:06 am
Location: Michigan
Contact:

Construction of the LK&O Railroad

Postby LKandO » Fri May 25, 2012 12:35 pm

Don't let the railroad name fool you, the LK&O is really 80% AC&Y plus 20% of two other LDEs that are important to me. The full name is the Lapeer Kitzmiller and Ohio RR. The Ohio portion is AC&Y Brittain Yard, Spur 4 to General Tire, along with a freelanced Goodyear/Firestone/General Tire complex. A detailed explanation is here: http://www.lkorailroad.com/about/

This thread is started to document my progress for those who may be interested in following along. There aren't many AC&Y modelers on the generic forums so it is nice to be amongst "like-minded people" as the banner says.

My work began in Jan 2010 starting with a near empty 2000 sq ft basement. The appropriations council (my wife) granted 1/3 of the space for railroad right-of-way. 2010 and first half 2011 were spent finishing the basement - sheet rock, electrical, paint etc. Q3-Q4 2011 and 2012 thus far were spent on suspended ceiling, building the major backdrop support structure, and a layout lighting system. Hopefully, the remainder of 2012 will see the beginning of bench work. My goal is to be ready for laying the first piece of track by Dec 31.

Here are a few photos of the train room as it exists May 2012. More photos and detailed posts are continuously updated on the LK&O blog site. The most recent post can always be found at http://www.lkorailroad.com. Thanks for following along!

100_4508.JPG
100_4508.JPG (99.12 KiB) Viewed 6606 times
100_4519.JPG
100_4519.JPG (99.11 KiB) Viewed 6606 times
100_4507.JPG
100_4507.JPG (105.03 KiB) Viewed 6606 times

User avatar
mattwoods
Posts: 44
Joined: Sun May 20, 2012 5:43 pm

Re: Construction of the LK&O Railroad

Postby mattwoods » Fri May 25, 2012 1:30 pm

LKandO your backdrops and valence look great, along with your room preparation. We will look forward to seeing your progress.

User avatar
LKandO
Posts: 37
Joined: Tue May 22, 2012 9:06 am
Location: Michigan
Contact:

Re: Construction of the LK&O Railroad

Postby LKandO » Fri May 25, 2012 4:19 pm

Thanks for the compliments Matt. The name is Alan by the way. I have my signature line data filled in but it isn't appearing in my posts for some reason. I'll eventually figure out what I am doing wrong.

User avatar
LKandO
Posts: 37
Joined: Tue May 22, 2012 9:06 am
Location: Michigan
Contact:

Re: Construction of the LK&O Railroad

Postby LKandO » Fri Aug 10, 2012 1:09 pm

Made a bit more progress. The ceiling is finished finally. Light panels over layout are next. Work pace will pick up once summer is over.

More pics at: http://www.lkorailroad.com/aisle-ceiling-panels-part-ii/
Last edited by LKandO on Mon Jun 10, 2013 10:10 pm, edited 3 times in total.

User avatar
Luke
Forum Moderator
Posts: 102
Joined: Sun May 20, 2012 9:00 pm

Re: Construction of the LK&O Railroad

Postby Luke » Sun Aug 12, 2012 5:55 pm

Not many model railroad layouts begin with the "total scene" as you have, Alan... clearly very precise work on the backdrop, ceiling and valence. It takes real vision and patience to overcome the desire to simply "start running trains".... and, tackle the important stuff later!

Am most interested on your choice of layout lighting behind the valence. I'm using (still experimenting) with a variety of 48" shop light fixtures with color corrected (balanced) florescent bulbs. The jury is still out. Keep us posted on your layout construction techniques. Also, how high will your bench work be off the floor? Bob

User avatar
LKandO
Posts: 37
Joined: Tue May 22, 2012 9:06 am
Location: Michigan
Contact:

Re: Construction of the LK&O Railroad

Postby LKandO » Sun Aug 12, 2012 7:22 pm

Am most interested on your choice of layout lighting behind the valence. I'm using (still experimenting) with a variety of 48" shop light fixtures with color corrected (balanced) florescent bulbs. The jury is still out. Keep us posted on your layout construction techniques. Also, how high will your bench work be off the floor? Bob


Bob, my lighting behind the valance is a combination of 5000K CFL lamps on 2' centers along with Series 5050-300 LEDs 6500K mounted to the front angle. Complete descriptions can be found here: http://www.lkorailroad.com/category/layout-lighting/
My top deck will be 53" zero elevation, bottom deck will be 31-1/2" zero elevation. Details here: http://www.lkorailroad.com/double-deck-arrangement/
Thanks for the compliments.

User avatar
LKandO
Posts: 37
Joined: Tue May 22, 2012 9:06 am
Location: Michigan
Contact:

Re: Construction of the LK&O Railroad

Postby LKandO » Mon Aug 13, 2012 10:34 pm

Got started fitting and installing the lighting panels over the layout. Bob, here is a picture that shows well how the LEDs are being used in conjunction with the CFLs.

100_4787.jpg
100_4787.jpg (115.05 KiB) Viewed 6511 times


100_4791.jpg
100_4791.jpg (131.18 KiB) Viewed 6511 times


100_4792.jpg
100_4792.jpg (198.75 KiB) Viewed 6511 times

User avatar
LKandO
Posts: 37
Joined: Tue May 22, 2012 9:06 am
Location: Michigan
Contact:

Re: Construction of the LK&O Railroad

Postby LKandO » Sat Oct 27, 2012 10:18 pm

Benchwork is about to begin! Details here: http://www.lkorailroad.com/benchwork-begins/

Image

User avatar
Peacock
Site Admin
Posts: 36
Joined: Sat May 19, 2012 5:55 pm
Location: Akron, Ohio
Contact:

Re: Construction of the LK&O Railroad

Postby Peacock » Sun Oct 28, 2012 9:04 pm

Nice! Looking forward to your progress. :mrgreen:

User avatar
LKandO
Posts: 37
Joined: Tue May 22, 2012 9:06 am
Location: Michigan
Contact:

Re: Construction of the LK&O Railroad

Postby LKandO » Fri Nov 09, 2012 8:48 pm

Made my bracket choice for mounting benchwork to the walls. Ordered a bunch of them today.

http://www.lkorailroad.com/benchwork-brackets/

3d-6L.jpg
3d-6L.jpg (42.23 KiB) Viewed 6358 times


Return to “AC&Y Modeling”

Who is online

Users browsing this forum: No registered users and 1 guest